Cut your shipping bill by up to 20% without switching carriers.
LogisPro picks the cheapest carrier from your negotiated rates, measures every package with computer vision and audits the invoices you receive. Cost driven by data, not by habit.
- Automatic selection of the optimal carrier on every shipment.
- 4K volumetric measurement at origin: zero dimensional weight surprises.
- Invoice-to-shipment reconciliation and automatic claims.
No commitment · No installation · Deployment in 4–8 weeks
Companies already optimising their transport with LogisPro
Factories · Distributors · B2B Ecommerce · 3PL Operators
Why are you paying more for shipping than you should?
Most companies shipping pallets and parcels overpay for the same three reasons. LogisPro fixes all three at once.
You choose carriers "out of habit"
Your regular carrier is not always the cheapest for that specific shipment. Without a system that compares rates in real time, each week money slips away that no one sees.
You estimate dimensions "by eye"
If the pallet or package leaves without being measured properly, the carrier calculates its volume when it arrives and applies volumetric surcharges that you can no longer dispute. Without real photos and measurements, no claim is possible.
No one reconciles invoices against delivery notes
Carrier invoices arrive with overcosts and surcharges for zone, weight or volume applied incorrectly. Without a system that audits them automatically, they get paid as-is and accepted as "normal".
Three leaks. One platform to close them all.
Savings, visibility and control on one platform
The money is in three places. LogisPro goes after all three, automatically, on every shipment that leaves your warehouse.
Savings on every shipment
For each pallet or package, the system crosses your negotiated rates with all your carriers and selects the cheapest operator. If the optimal choice changes tomorrow, the system changes it. You do nothing.
- Automatic selection of the optimal carrier
- Works with your rates, not ours
- Correct label first time, no errors
Real data, not estimates
PalletVision and QuboVision measure, weigh and photograph every package in seconds. Real dimensions replace "approximately" and eliminate surprise volumetric surcharges on the carrier's invoice.
- 4K volumetry, precision ±2–3 cm
- Photo of package before leaving warehouse
- No surcharges for undeclared volumetry
We audit your invoices for you
Every time a carrier invoice arrives, LogisPro crosses it line by line against the real shipment data. It detects overcosts, unwarranted surcharges and duplicates, and generates automatic claims.
- Automatic invoice-to-shipment reconciliation
- Claims generated in one click
- Audit trail defendable with carrier
Measure. Compare. Label. Audit.
A process that runs automatically: on every shipment, on every invoice, without anyone having to remember it.
Measure
PalletVision and QuboVision measure, weigh and photograph every package in seconds. If you prefer, you can also measure manually from the PDA.
Compare
The system crosses the shipment against YOUR rates with all your carriers and picks the cheapest operator. No renegotiating, no manual work.
Label
Print the carrier label from the PDA and prevent loading a package on the wrong truck. Zero loading errors.
Audit
When the carrier invoice arrives, the system audits it against the real shipment data and generates automatic claims if there are overcosts.
If you don't measure, your carriers will. And always upwards.
70% of volumetric surcharges come from shipments whose real volume was never measured at origin. PalletVision and QuboVision solve it before the label goes on—not after filing a claim.
Measure, photograph and weigh every pallet in under 2 seconds
PalletVision captures every package with a 4K camera, calculates its real dimensions with ±3 cm precision and generates a certified photo before it leaves the warehouse. Data travels to the system immediately and is crossed against your rates to select the optimal carrier.
If a pallet leaves the warehouse with its real, signed and photographed measurements, no carrier can apply a surcharge "after the fact" without justification. The discussion is closed before it starts.
What happens when you have no measurement system
PalletVision
Pallets up to 240 cm360° 4K photo, ±3 cm precision, packaging anomaly detection (breakage, asymmetric pallet, defective shrink wrap).
QuboVision
Boxes from 5 to 60 cm3D plug-and-play meter, ±2 cm precision, native LogisPro integration. Ideal for parcel packing station.
One platform for every moment of the shipment
Six coordinated modules covering the complete flow: from PDA picking to carrier invoice control.
Picking and Preparation
Guided picking from PDA with barcode validation. Automatic order grouping and elimination of manual errors.
Shipment and Transport
Automatic measurement, package photography, smart selection of cheapest carrier and integrated labelling.
Tracking and Deliveries
Load validated by carrier (prevents loading DHL on TXT truck), direct routes with waybill and eCMR, 24/7 monitoring.
Cost Control
Automatic pre-invoicing, cross invoice/shipment reconciliation, automatic claims and margin analysis by carrier.
Reverse Logistics
One-click returns management, automatic documentation and reversible inventory control.
KPIs and Analytics
Real-time performance metrics, strategic analysis, alerts and export to BI tools.
Each team works in their environment. Data in one place.
Operators from PDA. Management from browser. Same real-time state, no re-entry, no parallel spreadsheets.
Warehouse
Operators work 100% from PDA
- Step-by-step guided picking
- EAN code scanning
- Integrated measurement and photography
- No need for fixed computers
- Intuitive interface, zero training
Office
Powerful and complete web platform
- Executive dashboard in real time
- Complete shipment management
- Cost analysis and control
- Advanced KPIs and metrics
- Bidirectional ERP integrations
The platform your team will want to use
Real captures: dashboard, financial analysis, KPIs, incident management and truck loading. Zero fixed computers at the dock.
Android Warehouse App
Complete warehouse operations from PDA with no fixed computers
Main Menu
Documents
Picking
Connect your ERP system
Bidirectional integration with leading enterprise management systems.
Bidirectional synchronisation with Sage 200 and Sage X3
Native integration with SAP Business One and SAP ECC
Conectividad con Microsoft Dynamics 365 y NAV
Complete integration with Oracle NetSuite
+20 Integrated Agencies
Native compatibility with major logistics operators in Spain and Europe.
Your carrier not on the list? No problem. We integrate any logistics operator.
Integrated Measurement Technology
Computer vision solutions and terminals developed by SleuthX.
PalletVision
Volumetric pallet control, range up to 240 cm, precision ±3 cm. 360° 4K photography and anomaly detection.
QuboVision
3D box meter with ±2 cm precision. Range: 5–60 cm. Integrated photography and plug-and-play LogisPro integration.
PDA / Mobile Terminals
Native Android app for industrial PDAs (Zebra, Honeywell). Complete warehouse operation without fixed computers.
What customers see from month one
Metrics observed on customers with 2 or more carriers and between 500 and 5,000 shipments per month. No theory: your invoice, your operations.
* Typical range observed: 12–20% of total transport cost in the first year, on customers with 2–4 active carriers and volume between 500 and 5,000 shipments/month. Figures depend on volume, parcel/pallet mix and rate differential. Calculate your specific case with your real volume.
Objections we resolve before the demo
The eight questions that directors of logistics, operations and finance ask when evaluating LogisPro.
Do I need to change my carriers?
No. LogisPro works with your current carriers and your negotiated rates. Nothing changes; everything optimises.
How long does deployment take?
4–8 weeks depending on volume and integrations. Deployment is managed by our team in Spain.
Will my warehouse operators need to learn something new?
They work from the same PDA (Zebra, Honeywell) they use now, with step-by-step guided workflows and barcode validation. Zero formal training, zero fixed computers.
What if my rates are very specific?
The engine supports zones, weights, volumes, minimums, fuel surcharges, destination supplements, service bands and service types. Your conditions, exactly as negotiated.
What happens to my data?
Encrypted, servers in the EU, standard data processing againstct (GDPR). Your data is never shared with third parties or other customers.
How is real savings measured?
Comparing what you paid against what you would have paid with optimal decisions. We deliver a monthly report with breakdown by carrier, route and customer.
Is there a hardware cost?
PalletVision and QuboVision are available for purchase or rental. The PDA can be the one you already have. We tailor this to your operations during the demo.
What if the system makes the wrong choice?
You set the rules: preferred carrier by destination, maximum weight, lead time, customer commitments. The system optimises within those rules, not beyond them.
Your next month's invoice could be up to 20% cheaper.
We start by understanding what you're paying today and what you should be paying. We'll tell you in plain numbers, based on your real data.
No commitment · 2 minutes · Confidential · Results in 48 h · Support in Spain